News: How to Install the Finished 3D Channel Letter Signs?

varisigns aluminum channel letters signs

The Channel Letter Bending Machine is becoming more and more popular in signage making industry. It is a common advertising device and take the place of the traditional manual work which make signs by hand or tools. But how to install the finished 3D channel letter signs afterward? How many ways to install? The following is a brief introduction of how to install the finished channel letter signs. Let’s take a look, there are roughly three kinds.

channel letter bending machine feeding system

How to install the finished 3D channel letter signs?

I. Over the ear type: This method is more suitable for installation on many small signs. It is to make the foot code on the base of the signs. The foot code is generally installed in the upward direction of the signs, but generally it is not used. This way, it will affect the appearance, and the firm performance is not ideal, just more convenient. The signs on the door can take this approach, but now many are for aesthetics. This method of installation is relatively simple, so that the hanging type is suitable for indoor display. Outdoor installation considers wind, climate and other factors.

 

2. The code type: the installation method we often see is the code type, that is, after the blister letter is removed, the base of the blister letter is fixed first. This method is also commonly used, firm and beautiful, it is necessary to pay attention to nailing more screws, and the panel is firmly fixed, which is not easily scratched by the wind. Nowadays, the installation method generally uses this kind of comparison. This installation does not affect the external effect, and the installation is relatively good. The sign letters of storefront are generally the way to install the code.

 

3. The application of the sign letters on the top of the building or on the wall is using the welding steel frame, then the letter is welded on the steel frame, there is a certain support point, the steel frame is fixed, for the steel frame Part of the structure and safety are also required, and the form of the steel frame needs to be designed. Some people may ask, the steel frame is not good at the back of the letter. In fact, this does not affect the result. Generally, the letters on the top of the building are relatively large, and the distances are relatively far. The steel frame is very Few people noticed. Especially at night, what everyone see is the letter that shinning. The overall effect is still very good.

 

The above is the entire content of how to install the 3D channel letter signs produced by the Channel Letter Bending Machine. Hope it helps.

 

Online store: https://www.varisigns.com

Follow us on facebook: https://www.facebook.com/varisigns

Subscribe our YouTube channel below: 

https://www.youtube.com/channel/UCd_VQsUmPMVKgf99vdZUPhA?sub_confirmation=1

Product Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9 |
Copyright © 2019 Varisigns.com Online Store All Rights Reserved.
payment