Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type
Description:
Processing Material: Acrylic, Plastic, PVC, Plexiglass
This Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making.
It is suitable for heating acrylic within 1.5mm-4mm (0.06" x 0.16") thickness.
• Adopting PTC heating elements;
• Aluminum alloy thermal conductive plate is heating even;
• Adopts high quality heat-resistant engineering plastics, non-stick the acrylic sheet;
• Easy to operate and durable.
• PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control.
• Aluminum alloy thermal conductive plate can automatic adjust the angle between heating plate and acrylic.
• Making angle bending straight.
• Make your curved angles in beautiful arc.
• Easy operation, time-saving.
• Warranty: 2 years.
Voltage: AC 100-240V
Constant Power: Arc bending 60W±10%, Angle bending 39W±10%
Heating Temperature: 200°C±5%
Bending Letter Hight: 0 - 100mm (3.9")
Bending Thickness: 1.5mm - 4mm
Arc bending soft time (2.5mm thickness, 20℃): About 9 seconds
Angle bending soft time (2.5mm thickness, 20℃): About 3 seconds
Arc Heater Size: 100mm x 50mm x 2mm (3.9" x 2" x 0.08")
360 Degree Rotate End: Many tools are used frequently, its power cable is easy to get kink and break up. But our CS-HD-BC06 acrylic bending machine tool can avoid this situation because of the 360 degree rotate design of the power cable and heating plate joint.
Remarks:
• You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven.
• If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within 150mm.
• With short preheat time; restart the bender won't waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity.
• Please do not put the heating plate onto the power cable.
• Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order.
• 1pc Teflon Adhesive Tape will be gift for you when you buy A type angle bending tools.
How to use the High Temperature PTFE Teflon Adhesive Tape?
Place cut the adhesive tape into 3mm width, and then stick them on both sides of angle bender respectively. The Teflon adhesive tape can be used many times.
You can use the Teflon Adhesive Tape when you want heat pvc board.
Comparison for Our Original acrylic bender and Copycat Acrylic BenderFor now there are many copycat acrylic bender, acrylic bending machine, handheld acrylic bending tools in the market with inferior quality and awful performance. It will highly effect work efficiency in 3D letter channel making process.We list the comparison between our original acrylic bender and copycats acrylic bender as below; it is for clients better knowing how to choose acrylic bender before purchase.We bought copycats products below and disassemble them to list their parts and our acrylic bender inside parts for clients better knowing about their quality.
 |
 |
|
Heating plate of our Acrylic Bender |
Heating plate of COPYCAT Acrylic Bender |
 |
 |
|
Temperature Control PCB part of our Acrylic Bender |
Temperature Control PCB part of COPYCAT
Acrylic Bender |
 |
 |
|
Power Switch part of our Acrylic Bender |
Power Switch part of COPYCAT Acrylic Bender |
 |
 |
|
Power Plug of our Acrylic Bender |
Power Plug of COPYCAT Acrylic Bender |
|
PERFORMANCE COMPARISON |
 |
 |
|
Our Acrylic Bender |
COPYCAT Acrylic Bender |
 |
 |
|
|
About heating insulation film, the reason our acrylic bender do not put heat insulation film is the operator do not need to use finger to clamp this area to bend acrylic sheet. If you choose our original acrylic bender, you just need to handheld to operate as bellow.
As the copycat cannot hold the acrylic sheet seamlessly so that will need your finger to help to bend it like below
picture, so they have to put insulation film or their acrylic bender cannot hold and bend acrylic bender fully. |
 |
 |
|
Our Acrylic Bender |
COPYCAT Acrylic Bender |
|
About Vertical guide in copycat products, as we design acrylic bender its head are all flat, so it will have an vertical angle against desk when operator use it, so this vertical guide is totally useless. Our Acrylic bender head are all designed to be flat, that will have vertical angle when operator use it against desk |
 |
 |
Connect the power cable, after about 60 seconds heating time, you can use the bender. Using the angle or arc bender vertically clamp the acrylic plate, soften the acrylic plate several seconds, and then remove the bender, make angle and arc you want, fix it with glue.Sharp Corner Bending Machine Tool (Acrylic Angle Bending Machine Tool)
Round Corner Bending Machine Tool (Acrylic Arc Bending Machine Tool)
Processing Material: Acrylic, Plastic, PVC, Plexiglass
This type acrylic bender is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making.
Two-year Comprehensive Warranty for the Equipment & Machine of Varisigns.com
Varisigns.com guarantees that all the products are qualified in quality and the technical specifications have reached the factory inspection of OQC (Outgoing Quality Control).
(1) The entire body of all equipments or machines (except consumables) we sell is provided with a 2 - year warranty.
(2) Maintenance methods in which two options (either - or) available for the buyer:
· Normal: The buyer sends back a problematic part and Varisigns.com will identify whether repair or change a new one.
· Urgent: The buyer purchases a replacement and meanwhile sends back the problematic part, and then Varisigns.com will identify and decide whether refund the replacement.
(3) The Start Time of Warranty: Once such an equipment is shipped out.
(4) For maintenance service, please provide the invoice of purchase order (on which it indicates the equipment or machine model number, name and sold date), equipment or machine serial number, trouble or breakdown description, and better attach photo (s) or video (s).
(5) The purchase order PI is the essential proof for maintenance which ensures your legal interest and right. Please keep it properly after purchase.
Additional announcement, the following situations are not covered by the 2-year warranty:
(1) Any product or commodity which was not sold out by Varisigns.com (The model number and serial number are not issued by Varisigns.com)
(2) Any unauthorized repairing, mistake in use, damage, negligence, misuse, accident, change or modification, quality problem caused by incorrect installation;
(3) Tearing up or modifying of the label or the serial number of such an equipment or machine;
(4) Normal consumption or wearing off such nature usage, wearing down or aging of the cover or shell, plugging or socketing part or unit, etc;
(5) The using environment (temperature & humidity) did not match up the requirement specified in the manual or instruction document;
(6) The trouble or breakdown caused by incorrect operation or failure in following the operation instructed in the manual or instruction document;
(7) The parts or software not purchased from Varisigns.com;
(8) The wearing or vulnerable part;
(9) The breakdown or damage caused by nature disaster or force majeure (Such as earthquake, fire, flood, typhoon, thundering, etc).
For Receiving Equipment or Machine:
Normally, we will provide you the pictures of equipment or machine and its packing before shipping in order to proof such item in good condition without damages. When you receive it, suppose you find damage on external packing, instead of signing acceptance, please open it first and check the item inside the packing if there is any damage. If you find damage, you can definitely refuse signing acceptance and then claim loss from the express service company. At the same time, please take photos of the damaged packing and item, and contact us (Either our sales consultant whom you know or send email to “service@varisigns.com”). Hence, our people will assist you in handling such dispute.
Q: Are you trading company or manufacturer?
A: We are factory with a trading company.
Q: What we do after the invoice is confirmed?
A: Based on the value of the invoice, please arrange the payment to be directed to our account, After said payment is made, please provide a copy of it to us. After our confirmation, your order will be forwarded to the shipment section.
Q: How long will it take for the goods to be shipped out after the payment is confirmed?
A: After receiving your payment, the goods will generally be shipped out within 24 to 48 working hours, if no special request about them is made.
Q: How many days will it take for the goods to arrive to our customers?
A: Global Express: 3 to 6 days
Maritime transportation: Generally 10 to 30 days, depending on the consignee address. (there are different delivery times for different regions).
Q: How to resolve damage during shipping
A: If damage is found upon receiving your product, please contact your purchasing consultant as soon as possible, and provide a photo of said damage. The consultant will assist you in handling this type of problems.
Q: Ports of delivery
A: Our main delivery ports in China are: Shanghai, Guangzhou, Qingdao. These cover most of the nation and therefore reduce your costs.
Q: How to inquiry information about products of interest?
A: Either you can chat with us online or send us the email directly per sales@varisigns.com, our Customer Service representative will get in touch with you shortly.
Q: What about the packaging?
A: We make sure packaging keeps the products safe, when the packaging is found damaged after receiving the goods, please call our Customer Service consultant directly and also send an email to service@varisigns.com
deutsch
Espanol
Francais
Italiano
Portugues
Arabic
( 27 reviews )
