- Description
- Video
- Warranty
- Payment Terms
- Shipping & Returns
- Customer Reviews
Pneumatic Pistol Grip Punch/Flange Tool (8mm Diameter Hole)
For Punching Iron Sheet, Aluminum Strip and Stainless Steel Channel Letters
Features:
• This product is adopted imported fabrication process, which is invulnerable and wearable, and can easily punch stainless steel sheet;
• Easy operation, doesn t seize up work piece, smooth hole without punching trace;
• It was developed by the integration of hydraulic and pneumatic pressure;
• It performs a longer lifespan and is easy to punch in stainless steel, aluminum and iron sheet as long as within the required thickness;
• Punching Sheet Thickness: Aluminum Sheet-1.5mm, Galvanized sheet-1.2mm, stainless steel-1.0mm.
Tips:
This product can punches three sizes, respectively, 3mm, 4mm, 5mm, for which you can choose according to your own need.
Normally, it’s suggested to choose 3mm screw and 4 to 5mm rivet.
The gun head of puncher may vary in different specifications hence please go with the graphics shown, and different gun head and punch needle can’t interchange with.
This puncher is made of pneumatic power for which the user has to equip an air compressor to use along with.
Here we clarify!
It replaces the old manual punching plier; Small area punching and blank pressing while handling point welding and rivet connection in metal work pieces, advertising letters and logo punching; At factory, shop and personal studio, it is widely used, especially for processing metal ingots of advertising industry, it is an essential equipment that factory must have, and it increases work efficiency significantly.
Maintenance:
• This machine is a pneumatic tool for which its air source shall be processed to ensure clean and dry;
• Please periodically add hydraulic oil to lubricate the machine and it is prohibited to use high viscosity machine oil instead as it damages the machine;
• It is also not allowed to run the machine idling as well as not for tossing, dropping or rough operation since the parts of pneumatic tool are precisely fabricated and produced.
Note:
The product adopts the integration of hydraulic and pneumatic pressure that requires adding hydraulic oil according to using frequency.
We will add certain oil for test before shipping out, but during shipment, it may cause leakage. When you received the machine and if it does not work, just simply add hydraulic oil. Please contact our Customer Service for
how to add hydraulic oil.
Two-year Comprehensive Warranty for the Equipment & Machine of Shopping on Varisigns.com
Varisigns.com guarantees that all the products are qualified in quality and the technical specifications have reached the factory inspection of OQC (Outgoing Quality Control).
(1) The entire body of all equipments or machines (except consumables) we sell is provided with a 2 - year warranty.
(2) Maintenance methods in which two options (either - or) available for the buyer:
· Normal: The buyer sends back a problematic part and Varisigns.com will identify whether repair or change a new one.
· Urgent: The buyer purchases a replacement and meanwhile sends back the problematic part, and then Varisigns.com will identify and decide whether refund the replacement.
(3) The Start Time of Warranty: Once such an equipment is shipped out.
(4) For maintenance service, please provide the invoice of purchase order (on which it indicates the equipment or machine model number, name and sold date), equipment or machine serial number, trouble or breakdown description, and better attach photo (s) or video (s).
(5) The purchase order PI is the essential proof for maintenance which ensures your legal interest and right. Please keep it properly after purchase.
Additional announcement, the following situations are not covered by the 2-year warranty:
(1) Any product or commodity which was not sold out by Varisigns.com (The model number and serial number are not issued by Varisigns.com)
(2) Any unauthorized repairing, mistake in use, damage, negligence, misuse, accident, change or modification, quality problem caused by incorrect installation;
(3) Tearing up or modifying of the label or the serial number of such an equipment or machine;
(4) Normal consumption or wearing off such nature usage, wearing down or aging of the cover or shell, plugging or socketing part or unit, etc;
(5) The using environment (temperature & humidity) did not match up the requirement specified in the manual or instruction document;
(6) The trouble or breakdown caused by incorrect operation or failure in following the operation instructed in the manual or instruction document;
(7) The parts or software not purchased from Varisigns.com;
(8) The wearing or vulnerable part;
(9) The breakdown or damage caused by nature disaster or force majeure (Such as earthquake, fire, flood, typhoon, thundering, etc).
For Receiving Equipment or Machine:
Normally, we will provide you the pictures of equipment or machine and its packing before shipping in order to proof such item in good condition without damages. When you receive it, suppose you find damage on external packing, instead of signing acceptance, please open it first and check the item inside the packing if there is any damage. If you find damage, you can definitely refuse signing acceptance and then claim loss from the express service company. At the same time, please take photos of the damaged packing and item, and contact us (Either our sales consultant whom you know or send email to “[email protected]”). Hence, our people will assist you in handling such dispute.
You may use the following methods of payment: PayPal, Credit card, T/T Bank Transfer, Western Union.
Paypal:
Credit Card:
T/T Bank Transfer:
Telegraphic Transfer (T/T) payment:
(1) Place an order;
(2) Get the bank account information of Varisigns.com;
(3) Make the payment at the bank, and get the Payment Receipt;
(4) Send the Payment Receipt to [email protected];
(5) Receive the Tracking Number of your order;
(6) Wait for your order.
Bank Transfer Payment Information:
- BANK NAME: INDUSTRIAL AND COMMERCIAL BANK OF CHINA, SUZHOU BRANCH
- BANK ADDRESS: NO.381 EAST SUZHOU AVENUE,SIPCTD, SUZHOU, CHINA.
- BANK SWIFT CODE: ICBKCNBJSZU
- BENEFICIARY NAME: SUZHOU VARI TECHNOLOGY CO., LTD
- ACCOUNT NUMBER: 1102 0219 0991 4022 232 (USD) / 1102 0219 0993 8022 278 (EURO)
Western Union Payment:
Receiver’s First name: JINGHU
Receiver’s Last name: ZHANG
Address: No. 99 Weixin Road, SIP. Suzhou Jiangsu, P.R. China. 215000
Attention please, any communication emails from us to you shall be always marked with our website domain name, [email protected], and any payments to us shall be paid only to the accounts indicated on our website. If you find any contacts or payment requests of our site issue rather than from our email addresses or bank accounts indicated, please contact us as soon as possible for clarification and confirmation.
Means of Transportation
For the cargo weight less than 200KG, the global express and air carrier service shall be suitable, and usually it takes 3 to 6 days to arrive.
FAQs
Q: How long will my order be shipped out after payment confirmed?
A: After receiving your payment, your order will generally be shipped out within 24 to 48 working hours if there is no any special requirement.
Q: How many days will my order arrive?
A: To answer this question, please refer to the means of shipment. Generally:
Global Express: 3 to 6 days
Maritime transportation: Generally 15 to 45 days, depending on the consignee address.
(there are different delivery times for different regions).
Q: How to resolve the damage during shipping?
A: If there is damage found upon receiving your order, please contact our sales representative as soon as possible, and provide the photo(s) of damage. Our representative will help you find a solution in 2 business days.