Steel Coil Strip Rounded Corner Bender Tools

Description

Steel and Stainless Steel Coil Strip Rounded Corner Bender Tools for Metal Channel Letter

Different sizes of roller are equipped, which can be changed to adapt to different radian

Description of Steel Coil Strip Rounded Corner Bender Tools

• The tool must be used in a fixed table, otherwise uneven force, the effect will not good.
• Different sizes of roller are equipped, which can be changed to adapt to different radian.
• Adding lubricating oil to keep the bending tool work smooth and anti-rust.
• It can bend iron 1.0 mm, aluminium: 1.2 mm, stainless steel: 0.8mm, effective flanging height is 10 cm.
Working Height: 100mm
Gross Weight: 3.2kg/set
Packing Size: 9.0″ x 5.2″ x 6.5″(230 x 132 x 165mm)

Details of Steel Coil Strip Rounded Corner Bender Tools

Usage:

1. Prepare the strip and metal bending tool at first.
2. Put the diameter 40mm roller onto the bender.
3. Make the two positioning devices close to the roller, and then use spanner to tighten the bellow two screws.
4. The two positioning devices close to the roller.
5. Bending the strip by hand.
6. Finishing by roller of 40mm diameter.
7. Change the other roller of diameter 30mm/20mm onto the bending tool, you can attain bended strip with different radian.
Tips: You need to adjust the two screws to make the two positioning device close to the roller every time, if you change different diameter roller.

Remark:
Adding lubricating oil to keep the bending tool work smooth and anti-rust

Samples of Steel Coil Strip Rounded Corner Bender Tools

1. Finishing with roller of diameter 40mm
2. Finishing with roller of diameter 30mm.
3. Finishing with roller of diameter 20mm.
4. Finishing with roller of the bending tool.

Application: