deutsch
Espanol
Francais
Italiano
Portugues
Arabic
- Description
- Video
- Warranty
- Payment Terms
- Shipping & Returns
- Customer Reviews
Features:
• These cylinder magnets have super strong magnetic force, and can be used to fasten the shapes of ad letter signs (including ad letter signs with aluminum edges and aluminum-covered plastic iron sheet signs), so as to make the plate and the section bar combined tightly.
• These cylinder magnets don’t require so much of your skill in making letter signs, and can also lower the standards of making ad letter signs.
• Using these magnets, you can position letter signs into certain forms on an iron plate workbench.
• The reserved hole in each magnet is used for you to take out the super strong magnet. You can take it out only by using a screwdriver to prize with some force.
Specification:
• Diameter: 25mm
• Height: 30mm
• Weight: 0.15KG
Details:
Tips:
• The reserved hole in each magnet is used for you to take out the super strong magnet. You can take it out only by using a screwdriver to prize with some force.
• Usually 50 magnets are enough for making letter signs. But if you have a large number of signs to make and have enough laborers, you may need 100 magnets or so.
• We recommend you make a workbench with iron plates for making letter signs. You had better choose 3mm iron plates as your material, for the magnetic force of these super strong magnets can be fully used this way, and it will be more convenient to make letter signs.
Warning:
• NdFeB super strong magnetic materials are hard and crispy, having strong magnetic fields, and should be handled with care. When these super strong magnets attract each other or other iron-made stuff, you should be careful not to make them clash when you try to separate them. Otherwise, it may damage the magnets or pinch your hands.
• When the magnets attract each other and cannot be separated, you had better push them apart. Never try to prize them open!
• Please keep magnets away from ironware and those that can be easily magnetized, such as CRT, bank card, computer, TV, mobile phone and so on.
Attention:
If you choose express delivery, it is recommended that you buy no more than 25 magnets at a time, and magnetic inspection is not needed.
If the quantity of magnetic on one order is over 25, you need to pay magnetic inspection fee at the same time.
You need more than 50 magnets to make letters, if you want to make a large number of letters by many workers, you need about 100.
The strong magnet is small but quite heavy, if your order quantity is small, you can choose express delivery, and if the order is large enough, sea transport is suggested.
Application:
Two-year Comprehensive Warranty for the Equipment & Machine of Shopping on Varisigns.com
Varisigns.com guarantees that all the products are qualified in quality and the technical specifications have reached the factory inspection of OQC (Outgoing Quality Control).
(1) The entire body of all equipments or machines (except consumables) we sell is provided with a 2 - year warranty.
(2) Maintenance methods in which two options (either - or) available for the buyer:
· Normal: The buyer sends back a problematic part and Varisigns.com will identify whether repair or change a new one.
· Urgent: The buyer purchases a replacement and meanwhile sends back the problematic part, and then Varisigns.com will identify and decide whether refund the replacement.
(3) The Start Time of Warranty: Once such an equipment is shipped out.
(4) For maintenance service, please provide the invoice of purchase order (on which it indicates the equipment or machine model number, name and sold date), equipment or machine serial number, trouble or breakdown description, and better attach photo (s) or video (s).
(5) The purchase order PI is the essential proof for maintenance which ensures your legal interest and right. Please keep it properly after purchase.
Additional announcement, the following situations are not covered by the 2-year warranty:
(1) Any product or commodity which was not sold out by Varisigns.com (The model number and serial number are not issued by Varisigns.com)
(2) Any unauthorized repairing, mistake in use, damage, negligence, misuse, accident, change or modification, quality problem caused by incorrect installation;
(3) Tearing up or modifying of the label or the serial number of such an equipment or machine;
(4) Normal consumption or wearing off such nature usage, wearing down or aging of the cover or shell, plugging or socketing part or unit, etc;
(5) The using environment (temperature & humidity) did not match up the requirement specified in the manual or instruction document;
(6) The trouble or breakdown caused by incorrect operation or failure in following the operation instructed in the manual or instruction document;
(7) The parts or software not purchased from Varisigns.com;
(8) The wearing or vulnerable part;
(9) The breakdown or damage caused by nature disaster or force majeure (Such as earthquake, fire, flood, typhoon, thundering, etc).
For Receiving Equipment or Machine:
Normally, we will provide you the pictures of equipment or machine and its packing before shipping in order to proof such item in good condition without damages. When you receive it, suppose you find damage on external packing, instead of signing acceptance, please open it first and check the item inside the packing if there is any damage. If you find damage, you can definitely refuse signing acceptance and then claim loss from the express service company. At the same time, please take photos of the damaged packing and item, and contact us (Either our sales consultant whom you know or send email to “service@varisigns.com”). Hence, our people will assist you in handling such dispute.
You may use the following methods of payment: PayPal, Credit card, T/T Bank Transfer, Western Union.
Paypal:
Credit Card:
T/T Bank Transfer:
Telegraphic Transfer (T/T) payment:
(1) Place an order;
(2) Get the bank account information of Varisigns.com;
(3) Make the payment at the bank, and get the Payment Receipt;
(4) Send the Payment Receipt to sales@varisigns.com;
(5) Receive the Tracking Number of your order;
(6) Wait for your order.
Bank Transfer Payment Information:
- BANK NAME: INDUSTRIAL AND COMMERCIAL BANK OF CHINA, SUZHOU BRANCH
- BANK ADDRESS: NO.381 EAST SUZHOU AVENUE,SIPCTD, SUZHOU, CHINA.
- BANK SWIFT CODE: ICBKCNBJSZU
- BENEFICIARY NAME: SUZHOU VARI TECHNOLOGY CO., LTD
- ACCOUNT NUMBER: 1102 0219 0991 4022 232 (USD) / 1102 0219 0993 8022 278 (EURO)
Western Union Payment:
Receiver’s First name: JINGHU
Receiver’s Last name: ZHANG
Address: No. 99 Weixin Road, SIP. Suzhou Jiangsu, P.R. China. 215000
Attention please, any communication emails from us to you shall be always marked with our website domain name, i.e.@varisigns.com, and any payments to us shall be paid only to the accounts indicated on our website. If you find any contacts or payment requests of our site issue rather than from our email addresses or bank accounts indicated, please contact us as soon as possible for clarification and confirmation.
Means of Transportation
For the cargo weight less than 200KG, the global express and air carrier service shall be suitable, and usually it takes 3 to 6 days to arrive.
FAQs
Q: How long will my order be shipped out after payment confirmed?
A: After receiving your payment, your order will generally be shipped out within 24 to 48 working hours if there is no any special requirement.
Q: How many days will my order arrive?
A: To answer this question, please refer to the means of shipment. Generally:
Global Express: 3 to 6 days
Maritime transportation: Generally 15 to 45 days, depending on the consignee address.
(there are different delivery times for different regions).
Q: How to resolve the damage during shipping?
A: If there is damage found upon receiving your order, please contact our sales representative as soon as possible, and provide the photo(s) of damage. Our representative will help you find a solution in 2 business days.
You Might Also Like
- 24"(600mm) Manual Acrylic Light Box Plastic PVC Bending Machine Heater, 1-6mm Thickness
- $126.00 $113.40
Save: 10% off
- 120W Handhold Welding Tool Electric Soldering Iron for Welding Metal Channel Letters, 110-230V
- $31.00 $27.90
Save: 10% off
- Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 150mm
- $125.00 $112.50
Save: 10% off
